Manual Channel Configuration for Multiple Sets

Below are the recommended manual channel configurations for using up to 4 real-time wireless sets in a single area along with some general tips. Treat the sets in order of importance, so set 1 is the set you want the best connection and quality on.

 

2 sets
-----------------------

Set 1:
5510
5550
5670
5755
5795

Set 2:
5190
5230
5270
5310

3 sets
-------------------------

Set 1:
5190
5230
5270
5310

Set 2:
5670
5755
5795

Set 3:
5510
5550


4 sets
----------------------------
Set 1:
5190
5230
5270
5310

Set 2:
5510
5550

Set 3:
5670

Set 4:
5755
5795


More than 4 sets is not recommended within relatively close proximity.

Other tips:
Keep everything at least 5 feet apart.
Ensure that the filming environment does not have high powered wifi using 5ghz. 5ghz wifi will interfere with unit operation.
If necessary, use a wifi analyzer application to see which 5ghz channels are being used by wifi and get away from those, or set the router to channels that don't
inferfere with the Paralinx units.
If you need to use many sets and less range is not as issue for you, using 2dbi antennas on the Tx instead of 5dbi might help.
Make sure everything is mounted in a way where antennas are not obstructed.
Try to keep the line of sight as clear as possible. Mounting everything high up to avoid interference and using array panels on the receiver can help maintain stronger signal.

Have more questions? Submit a request

0 Comments

Article is closed for comments.
Powered by Zendesk